山东聚亿能智能科技有限公司所创建的势必锐tm技术原理是在我们实际金属晶体中，往往存在着偏离理想结构的区域，通常把晶体中原子偏离其平衡位置而出现不完整区域称为晶体缺陷。金属晶体重塑技术主要是利用超声波驻波特性，以26000hz/秒左右的频率对金属施加冲击，金属受到冲击后，晶体的各层就会发生相对的滑动，但不会改变原来的排列方式，在金属原子间的电子可以起到类似轴承中滚珠的润滑作用，使金属塑性增加，变形抗力下降。
而我们势必锐tm技术与常规表面加工比较，金属晶体重塑tm加工有以下优点：作用过程平稳，作用力小，且工件受力均匀;作用过程中产生的热量少，不必用冷却液;经过振动挤压的工件，其表面质量大幅度提高，因而使用寿命在原来的基础上也大幅度提高。
加工原理图
镜面加工效果
加工效果图
内部原理图
产品英文详情介绍
rui tm technology is bound to the principles of shandong-billion to intelligent technology co., ltd. created in our real metal crystals, often there are deviations from the ideal structure of the region, atoms in a crystal usually deviate from its equilibrium position and that there is no complete area known as crystal defect. remodeling metal crystals is the use of ultrasonic technology vswr at a frequency of about 26000hz / sec impact is applied to the metal, the metal impact, the layers of the crystal will be relatively slidable, but will not change the original arrangement in the electron between the metal atoms may be similar to lubricate the bearing balls, the metal plastically increased, decreased deformation resistance. and we are bound tm sharply with conventional surface processing comparison techniques, metal crystals tm remodeling process has the following advantages: the role of stationary process, a small force, the workpiece and uniform force; less action of heat generated during no need to use a cooling liquid; after vibration extruded workpiece, which greatly improved the quality of the surface, and thus a substantial increase in the service life based on the original. schematic mirror finish machining processing results internal schematic diagram of fig.
13376366880