- 品牌：Haicap
- 型号：400V68uF
- 介质材料：
- 应用范围：
- 外形：
- 主泵电机功率：
- 提供加工定制：
- 功率特性：
- 频率特性：
- 调节方式：
- 引线类型：
- 允许偏差：
- 耐压值：
- 等效串联电阻(ESR)：
- 标称容量：
- 损耗：
- 额定电压：
- 绝缘电阻：
- 温度系数：
产品应用product applications
功能function
储能、滤波、隔直流通交流、旁路、耦合、调谐、整流等.
energy
storage, filtering, blocking flow of exchanges, bypass,coupling, tuning,
rectifier, etc..
适用范围scope
km型铝电解电容器,系单向导针引出型式产品,性能稳定可靠,适用于彩色电视接收机、计算机、通迅设备等电子线路.
km type aluminum electrolytic capacitors, it is a single wizard
needle leads to thetype of product, stable and reliable performance electronic
circuits for color television receivers, computers, communication equipment,
etc.
安装方式installation
将电容引线直接插入安装.
the capacitor leads
directly into the installation.
使用须知instructions
直流铝电解电容只能使用在直流电路上,其极性必须标明.
dc aluminum electrolytic capacitors can only be
used in dc on theroad, its polarity must be marked.
在电路回路中如不清楚或不明确线路的极性时,则建议使用无极性铝电解电容.
in the circuit loop, such as clear or not clear
when the polarity of the line, it is recommended to use non-polarized
electrolytic capacitors.
铝电解电容器的工作环境温度不能超过规定的使用温度范围.
electrolytic capacitors is the operating
temperature can not exceed the specified temperature range.
铝电解电容器应该储存于低温及干燥场所,如储存期较长,则使用前应用额定电压对其重新老练.
electrolytic capacitorsshould be stored in low
temperature and dry place, such as the storage period is longer, the rated
voltage is applied before using them to re-experienced.
通过铝电解电容器的纹波电流不应超过其允许范围，如果超过了规定值，需选用耐大纹波的铝电解电容器.
the ripple current through the electrolytic
capacitor should not exceed the allowable range, if more than the specified
value, the need to use a large ripple-resistant aluminum electrolytic
capacitors.
使用时铝电解电容器的工作电压不应超过其额定工作电压.
use the operating voltage aluminum electrolytic
capacitors shouldnot exceed its rated voltage.
电烙铁等高温发热装置应与铝电解电容器之塑料外壳保持适当的距离,以防止过热造成塑料管破裂.
electric iron and other high-temperatureheating
with aluminum electrolytic capacitors of the device should maintain an
appropriate distance from the plastic housing to prevent overheating caused by
plastic pipe rupture.
在焊接铝电解电容器时,其焊接时间及焊接温度不应超过10秒钟及260摄氏度.
in welding aluminum electrolytic capacitor, the welding time
and weld temperature should notexceed 10 seconds and 260 degrees celsius.
对引线、端子,如施加超过规定的力,将会破坏铝电解电容器的内部结构.
of lead, terminal, such as applied exceeds the force will destroy the
internalstructure of aluminum electrolytic capacitors.
东莞市海容电子有限公司
朱
13556753790
谢岗镇眼口工业区