- 加工定制：
- 类型：多参数测试仪
- 品牌：
- 型号：
- 测量范围：
- 精确度：
- 仪表尺寸：
- 适用范围：
- 仪表重量：
- 工作电源：
- 规格：
automatic scaling and units2 -oscilloscope on-screen readout of magnitude and amps reducesmeasurement errors with no more hand calculationsac/dc input couplinglow insertion impedance reduces device under test loadingsplit-core construction allows easy circuit connectionstatus indicators provide visual operating status and notificationof potential error conditions - degauss, probe open, overload, notterminated into 50 ω, noncompatible probe typelow dc drift and noise allows improved low-level currentmeasurements3rd party safety certification
meets today's ac/dc current measurement applicationsenter a short description of your concept here (optional).
the tcpa300 amplifier, when used with tcp312a, tcp305a, or tcp303probes, provides a wide range of current measurement capability andspans the gap between low-level milliamp measurements to very highcurrent levels. these three probes provide current measurementcapabilities of 30 a, 50 a, and 150 a dc continuous.for even higher current levels, the tcpa400 amplifier with thetcp404xl current probe measures 500 a dc continuous and750 a dc continuous, derated with duty cycle.
higher-frequency performance is available with the tcp312aw/tcpa300 providing ≥100 mhz bandwidth and a maximum currentof 30 a dc.
measurement errors and manual calculations are now a thing of thepastenter a short description of your concept here (optional).
with this new series of current measurement tools, automaticcontrol and on-screen scaling and units is provided for users oftektronix tds3000, tds500, tds600, tds700, tds5000, tds6000, andtds7000b series oscilloscope systems (the dpo3000, mdo/mso/dpo4000,mso/dpo5000, and dpo7000 series oscilloscopes, the tpa-bnc adapteris required).
the tcp300/tcp400 current measurement systems seamlessly integratewith your tds series oscilloscope.
even non-tekprobe systems can use the tcpa300/400 series tomake proper current measurements by simply multiplying the measuredoutput voltage on the oscilloscope by the tcpa300/400 seriesrange setting.
tcp303w/ tcpa300
bandwidth
dc –50 mhz
risetime
≤7 ns
dcaccuracy
±3% ofreading
dcaccuracy, typical
±1% ofreading
lowestmeasurable current (at ±3% accuracy at dc)
scope set to 1 mv/div and 20 mhz bw limited
5 ma
maximumamp-second product, typical (based on amplifier rangesetting)
500 a*μs –5 a/v
na – 10 a/v
maximumwire voltage, bare insulated
150 v cat ii 300 v catii
ac-coupling low-frequency bandwidth,typical (low pass – 3 db point)
<7 hz
displayed rms noise, typical (at20 mhz bandwidth limit)
≤1.25 ma rms
signaldelay (to output bnc)
19 ns
insertion impedance
0.02 ω at 1 mhz 0.1 ωat 10 mhz
0.35 ω at 50 mhz
high-currentsensitivity
tcp303w/ tcpa300
range
50 a/v
dc(continuous)
150 a
rms(sinusoidal)
150 a
peak
500 a
low-currentsensitivity
tcp303w/ tcpa300
range
5 a/v
dc(continuous)
25 a
rms(sinusoidal)
17.7 a
peak
500 a
深圳日图科技有限公司重庆分公司
王伟
15018503776
重庆市江北区观音桥茂业东方时代大厦35楼3515室