宜兴pp卧式洗涤塔

加工定制是

voc废气的生物法净化实质上是利用微生物的生命活动将废气中的有害物质转变成简单的无机物( 如co2和h2o) 及细胞物质等，主要工艺有生物洗涤法、生物过滤法和生物滴滤法三种有机废气生物处理是一项新的技术，由于反应器涉及到气/ 液/固相传质及生化降解过程，影响因素多而复杂，有关的理论研究及实际应用还不够深入、广泛，许多问题需要进一步探讨和研究，主要包括建立准确的反应动力学模式;填料特性以及如何克服颗粒物在滤床中积累造成的堵塞; 动态负荷(浓度和废气流量波动较大) 的调控; ***适工艺参数的确定;高浓度有机废气的治理;适合于特定有机物降解的细菌种类和接种方法等。
有机废气治理能够保护我们的大气，保护环境，同时它是用多种技术措施，通过不同途径减少石油损耗、减少有机溶剂用量或排气净化以消除有机废气污染。同时在有机废气治理问题不断扩大不断关注的同时，有机废气中活性炭处理方法也逐步让人重视。为防止污染，除减少资源损耗和工业废气的排放量，排气净化、废气处理是目前切实可行的治理途径。常用的方法有很多种，如：催化燃烧法、热力燃烧法等等。目前***为常用的就是活性炭吸附方法。
voc biological purification of waste gas is essentially the change of harmful substances in exhaust gas into simple inorganic compounds by microbial life activities (such as co2 and h2o) and cell materials, the main process of biological washing method, biological filtration and biological trickling filter three kinds of organic waste gas biological treatment is a new because the reactor technology, relates to the gas / liquid / solid mass transfer and biodegradation process, many influence factors and complex, theoretical research and practical application about is not deep and wide, many issues need further exploration and research, including the establishment of model of reaction kinetics accurately; packing characteristics and how to overcome the particles caused by the accumulation of plug in the filter bed; dynamic load (concentration and gas flow fluctuation) regulation; to determine the optimum process parameters; treatment of high concentration organic waste gas; suitable for specific organic the species and inoculation methods of biodegradable bacteria.
organic waste gas treatment can protect our atmosphere and protect the environment. at the same time, it uses various technical measures to reduce oil consumption, reduce organic solvent consumption or exhaust purification to eliminate organic pollution. at the same time, at the same time, the treatment of organic waste gas is constantly increasing, and the treatment method of activated carbon in organic waste gas has been gradually paid attention to. in order to prevent pollution, in addition to reducing the loss of resources and the emission of industrial waste gas, the treatment of exhaust gas and waste gas is a practical and feasible treatment way at present. there are many common methods, such as catalytic combustion, thermal combustion, and so on. at present, the most commonly used method is the activated carbon adsorption.
使用注意事项
1、循环水量的调节：由淋塔供水泵来决定，当运行台锅炉时开台即
可，当冬季两台或三台同时运行时，将两台水泵全部打开，泥浆泵其流量应根
据循环泵的流量来调节，使其相等即可。
2、喷淋塔内加药池内的加药量：当运行台锅炉时，加入碱2袋，加入熟石灰
5袋，如冬季运行两台或三台时，可按相应倍数增加药量。
3、喷淋塔沉淀池要经常清理，夏天周清理次，冬季三天清理次。
4、灰水分离器排污时，每班排放次，要分别打开排污阀门，直到有清水排
出为止。
5、以上各转动部件要经常检壹、注油，发现故障要殛时排除，以保证喷淋塔
脱硫效果。
6、在上、下楼梯加药时要注意安全，要有自主保安，相互保安意识。
7、工作完毕要及时清理好卫生，做到人走场地清。
喷淋塔
逆流式废气洗涤塔有本体、填充层、除雾层、循环洒水管路，及循环水槽等构成。本体包含了废气入口、出口、视窗，维修入孔及洗涤塔内部用以支撑及固定用之结构，以确保设备本身之耐蚀性增加其使用寿命。逆流式废气洗涤塔填充层主要有tellerette type k-2#型式为作为洗涤塔填充材，其材质为pp/pvc。tellerette type k-2#型式之填充材具有比表面积大，低压损，及物质移转高底低等特性，相较于其他型之填充材选择tellerette 选择有较高之处理效率及较低之运转费用。
逆流式废气洗涤塔除雾层：采用tellerette type k-2#型式之填充材作为除雾器材质为pp/pvc，或者选用高速除雾板作为除雾器，其材质为pp/pvc，以上二种型式之除雾器其水气之去除率均可达99%。