1. before using your mmmagic hose place the rubber washer firmly inside the female
coupling.this will prevent leaking.when using the magic hose for thr first time,it is
recommended to first fill and extend hose and slightly stretch hose to release tightness in outer
folded material covering.then release water and refill to use normally.
2. attach the female end of the magic hose to the water source.
3. attach the supplied on/off valve to the male end of the magic hose.
4. turn the on/off valve to the off position.
5. turn the water on at the source .gradually increase the water pressure.the magic hose will
automatically expand up to 3 times its original length.
6. when the magic hose is fully expanded turn the on/off valve to the on position.you can
now use the magic hose like any ordinary hose.
深圳市蓬富硅橡胶有限公司
王先生
18938651918
龙华街道锦绣新村21栋4层