hb-yd114(q)
1.6
50-55
(受强烈冲击后
after high impact)
高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。
high-manganese steel hardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
hb-yd115(q)
1.6
50-55
(受强烈冲击后after highimpact)
用于受严重冲击高锰钢堆焊，加工硬化效果显著。
applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
hb-yd165(q)
1.6
60-65
高硬度耐磨焊丝，适用于磨粒磨损表面堆焊
high hardness wear-resistant wire, it is used to abrasive wear surfacing welding.
hb-yd172(q)
1.6
≥40
用于堆焊齿轮、挖泥斗、矿山机械等磨损件
applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery.
hb-yd207(q)
1.6
≥50
用于堆焊推土机刀片，螺旋桨等磨损零件
applied to repair surface of high wear parts, such as bulldozer blade and propeller.
hb-yd212(q)
1.2/1.6
≥50
用于堆焊各种受磨损的机件表面，如齿轮、挖斗、矿山机械
applied to repair surface ofwear parts, such as gear mud bucket and mining machinery.
hb-yd256(q)
1.6
hb≥170
高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊
high-manganese steel hardfacing flux-cored wires,itis applied to repair surface of high impact wear parts, such as crusher.
hb-yd258(q)
1.6
55-60
用于耐磨表面堆焊
applied to repair surface of wear parts.
hb-yd265(q)
1.6
60-65
高硬度耐磨焊丝，适用于磨粒磨损表面堆焊
high hardness wear-resistant wire, it is used to abrasive wear surfacing welding.
hb-yd322(q)
1.6
≥55
用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件
applied to repair surface of high wear resistance parts, such as die and cutting cutlery.
hb-yd327a(q)
1.6
≥55
专门用于模具堆焊，耐磨性能高于d322
used to mouldsurfacing, wear resistance is better than d322.
hb-yd337(q)
1.6
≥48
用于铸钢或锻钢上堆焊锻模
applied to repairforging die at cast steel or forging steel.
hb-yd397(q)
1.6
≥40
用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件
applied to repair hotforging die at cast steel or forging steel, or high strength wear surfacing.
hb-yd405a(q)
1.6
50-59
用于热轧辊开坯辊堆焊
applied to repair hot-rolling blooming rollor.
hb-yd430a(q)
1.6
20-35
打底层堆焊焊丝
a backing hardfacing flux-cored wires
德州泰源特种耐磨焊条厂
张雷
13365449096
德城区高新科技开发区20号