Chemical Construction Industry Single Cylinder Hydraulic Cone Crusher

Product Description

Product Introduction
CH high-efficiency hydraulic cone crusher is a high-efficiency crusher designed by our company with the introduction of American technology and the combination of international metal material performance. CS series high-efficiency spring cone crusher is used in the ferrous and non-ferrous metal beneficiation process, which can effectively reduce the particle size of ore entering the mill, achieve more crushing and less grinding, and improve the production capacity of the mill, save electricity and steel, and greatly improve the economic benefits of the mine.
Product Advantages
·Large production capacity and high crushing efficiency
Depending on the perfect coordination between the overall structure. By perfectly combining the crushing chamber type, eccentricity and motion parameters, it is possible to match greater crushing force, higher speed and optimal stroke. In addition, combined with optimized strength design and high-quality component materials, the single-cylinder hydraulic cone crusher has a 20%-30% higher output than the spring cone crusher when the diameter of the large end of the moving cone is the same.
·Laminated crushing, good product shape
The single-cylinder hydraulic cone crusher adopts the laminated crushing principle and is equipped with a high swing frequency of the moving cone. While increasing the output, it significantly improves the product particle shape, significantly increases the proportion of high-quality particle shapes in the finished product, and makes the particle shape more uniform.
·Multiple chamber types combined with the optimal stroke to meet various particle size requirements
The equipment has two types of medium crushing and fine crushing. Each type has a variety of standard chamber types to choose from, and the eccentricity can be adjusted by replacing the eccentric sleeve. According to different production processes, suitable production chamber types and eccentricities are equipped to maximize the value of the equipment.
·Long-life liner
The design concept of constant cavity shape is that the cavity shape of the liner remains basically unchanged when it is crushed and worn, ensuring high crushing efficiency, thereby achieving synchronous wear of the liner, avoiding local malicious damage to the liner, achieving consistent wear rate of the liner, and extending the service life of the liner.
·Simple structure, easy maintenance, low operating cost
The equipment has a simple structure, and all maintenance work can be completed after removing the upper frame, which not only makes inspection and maintenance more convenient, but also reduces maintenance costs. The positive pressure dust prevention system ensures that the internal pressure of the crushing chamber is always higher than the external pressure, effectively reducing the dust or other small particles entering the crusher, reducing damage to the bearings, thereby reducing maintenance workload and extending the service life of lubricating oil and equipment.
·Hydraulic automatic cavity cleaning, overload protection
The structure combines the main shaft floating and hydraulic lifting control, integrating the adjustment of the discharge port and the overload protection function, simplifying the structure of the crusher while improving the reliability of the equipment operation, making maintenance simpler, operation more convenient, and downtime shorter.
·Fully automatic control of the production process
The fully automatic control system provides a variety of operating modes for users to choose, such as manual control, constant discharge port control, and constant power control; it can continuously monitor the actual load inside the crusher and automatically adjust the equipment to optimize the utilization rate of the crusher, so that the crusher can perform at its best at any working time; it can automatically monitor and provide warnings, display various operating parameters, and understand the operation of the crusher in real time. For example, when the liner is worn to the replacement period and can no longer be used, it will automatically display and alarm on the console.
Working Principle
The horizontal shaft is driven by the motor to rotate, and the horizontal shaft drives the eccentric sleeve to rotate through the gear, and then the eccentric sleeve drives the moving cone to swing in a circle, thereby achieving continuous extrusion and crushing of materials. By adjusting the hydraulic cylinder at the bottom of the moving cone, the moving cone can be moved up and down to conveniently adjust the size of the discharge port and the size of the product particle size. At the same time, the hydraulic cylinder also provides iron protection. When an object that cannot be crushed (such as an iron block) enters the crushing chamber, the hydraulic cylinder automatically makes the moving cone fall, releases the iron block, and protects the crusher. After the foreign matter is discharged, the moving cone automatically returns, and the equipment resumes working state and continues crushing.
Specifications and Performance Parameters

Model	Cavity	Max Feed Size (mm)	Minimum Discharge Port Size (mm)	Capacity (t/h)	Max Installed Power (kw)
CS420	S1(Extra Coarse)	240	22	85-170	90
	S2(Medium Coarse)	200	19	70-130
CH420	H1(Fine)	135	10	45-130
	H2(Medium Fine)	65	8	35-80
	H3(Extra Fine)	38	4	27-60
CS430	S1(Extra Coarse)	360	25	120-345	160
	S2(Medium Coarse)	300	33	105-305
	S3(Coarse)	235	19	90-275
CH430	H1(Fine)	185	13	60-210
	H2(Medium Fine)	90	10	65-165
	H3(Extra Fine)	50	6	48-105
CS440	S1(Extra Coarse)	450	35	255-605	250
	S2(Medium Coarse)	400	29	215-515
	S3(Coarse)	300	25	190-490
CH440	H1(Fine)	215	16	110-395
	H2(Medium Fine)	110	13	115-340
	H3(Extra Fine)	70	8	90-225
CS660	S1(Extra Coarse)	560	41	355-1050	315
	S2(Medium Coarse)	500	38	305-895
CH660	H1(Fine)	275	16	170-665
	H2(Medium Fine)	135	16	190-505
	H3(Extra Fine)	65	13	205-320
CH870	H1(Fine)	300	22	448-1512	520
	H2(Medium Fine)	155	19	400-1372
	H3(Extra Fine)	80	10	280-775
CH890	H1(Fine)	370	25	480-2128	750
	H2(Medium Fine)	195	22	552-1605
	H3(Extra Fine)	85	10	365-885

CS Medium Grain Size Distribution Curve CH Fine Grain Size Distribution Curve
Application areas
river pebbles, granite, basalt, iron ore, limestone, quartz, diabase, iron ore, gold ore, copper ore, etc.
Company Profile
Henan Anshun Machinery Equipment Co., Ltd. is a modern enterprise engaged in the research and development, production, sales and service of equipment in the fields of mining crushing, building crushing, tower sand making, etc. It is the first unit to pass the ISO9001 quality certification system, the EU CE certification unit, and an enterprise with the right to import and export. Over the years, the company's products have been sold well throughout the country and exported to Vietnam, North Korea, Central Africa and the Middle East countries and regions. The company's after-sales service team is spread all over the world. The complete after-sales service management system has been recognized and praised by the industry, and is well-known at home and abroad, becoming a shining pearl in my country's mining machinery manufacturing industry.Packaging & Shipping
Certifications
FAQ
Support:We can not only provide the good machines, but also wholeheartedly provide the comprehensive for our clients. The series of professional technology service will make you have an excellent product experience.After-sales service support :After we signed the purchase contract and have a certain reputation guarantee, we will contact the professional group that responsible for ship bookings, commodity inspection, commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, until the product you purchased properly to your hands.We will send a professional and high levels installation engineer team at the same time the product properly to the destination, in order to supply you a full range of products installation services. For some typical problems, our rigorous installed engineers also will do some certain installation debugging training, etc.Technological support :ANSHUN Machinery has been largely adopting new technologies, new techniques and high-tech equipment. And ANSHUN Machinery also has strict and effective quality control system. We have obtained ISO9001:2000, TUV and CEquality system certificate.