Dimmable Bedside Lamp Warm White Night Lamp Rechargeable Nursery Lamp

Product Description

Product Description

Name:	Night Lights for Kids Touch Control&Timer Setting Baby Egg Lamp
Model:	WS-160-E
Material:	ABS
Weight:	250g
Battery:	Built in lithium battery -2500mah
Mode:	Warm White + Color Changing Rgb
Product size :	(with base) diameter 93 * 128mm
Charging time:	5h
Protection grade:	IP65
Input voltage:	5V = 1A
Light source:	26 LEDs
Color temperature range:	2700-6500k
Luminous flux:	300 lumens
Service life:	about 50000 hours
Power :	(Desktop Mode) 2W (Portable Mode) 3W
Working time	(touch mode): 6h (brightest light) - 150h (darkest light) (manual mode): 4H (brightest light)
Packing list:	LED eggshell lamp × 1. Induction charging base x1, USB cable x 1, mountaineering buckle × 1. Operating instructions

Products Detail
Note:
1. When the battery level is lower than 20%, the LED indicator will turn red.
2. The LED indicator will keep blinking when charging and turn blue when charging has completed.
3. In standby mode, the LED indicator will be blinking on and off for easylocating in the dark.
Portable Mode: Controlling the light through the Power Button to avoidaccidentally tapping the touch zones
1. Press and hold the Power Button for 1.5 seconds to turn on / off the light.
2. When the light is on, press the Power Button to cycle through 100%,50%,10% brightness, and SOS white light mode.
Note:
1. In portable mode, tap the Top Touch Zone twice to enter desktop mode. Thebrightness and light temperature will remain the same as before the touch.
2. In desktop mode, press the Power Button once to resume portable mode.,
3. Please turn the light off when not using it for a long time.
Desktop Mode: Operating the light by tapping the touch zones
1. In desktop mode, tap the Top Touch Zone twice to turn on / off the light.
2. Tap and hold the Top Touch Zone to adjust the brightness. When thebrightness reaches the highest or lowest level, the LED indicator will blinkonce. Remove your hand and tap again to adjust the brightness accordingly.
3. Tap and hold the Logo to adjust the color temperature. When the colortemperature reaches the highest or lowest level, the LED indicator will blinkonce. Remove your hand and tap again to adjust accordingly.
4. In desktop mode, when the light is off, tap and hold the Top Touch Zone for0.
5 seconds to enter night light mode. The lowest level color temperature andbrightness will be activated.5. Top the Logo twice to set 1 hour timer. The LED indicator will light up in green.
Related Product Recommendation

Custom Packag Our factory can accept :
(1)Sample Printing
(2)Custom Logo
(3)Customized Products
(4)Custom Color
(5)Custom Packaging
Bubble box / gift box / display box / suit / white box / color box so on.
Multiple modes of transportation: sea, air, express so on .
Company Profile
Customer Question & Answer