Derakane Corrosion Resistance 470-300 Vinyl Ester Resin Polyester Resin for High Temperature Chlorination or Caustic Scrubbing and Storage, Waste Treatment

Product Description

Derakane Momentum Vinyl Ester Resin Corrosion Resistance 470-300
Product Description DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties at higher temperatures. This resin offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The longer stability provies additional flexibility to fabricators in storage and handling. DERAKANE MOMENTUM 470-300 resin offers an economical alternative to exotic alloys by allowing the use of lower-cost FRP over traditional materials. This resin resists solvents, chemicals, and acidic oxidizing environments to provide long lasting, reliable equipment for corrosive materials (please contact us before using thixotropic agents and fillers. Addition of thixotropic agents and fillers can compromise corrosion resistance). DERAKANE MOMENTUM 470-300 resin retains strength and toughness at elevated temperatures which enables users to operate the equipment in a variety of applications. It contains only 33 weight percent styrene, resulting in reduced styrene emissions and allows fabricators to meet California's South Coast Air Quality Management District Rule 1162. Note: Contact us before using thixotropic agents and fillers. Addition of thixotropic agents and fillers can compromise corrosion resistance.
APPLICATIONS AND USE DERAKANE MOMENTUM 470-300 resin is suitable for applications involving high temperature chlorination or caustic scrubbing and storage, industrial waste treatment facilities and solvent extraction processes used in mining. It is also used for acid transport, tank, truck and railcar linings, and gasohol storage. DERAKANE MOMENTUM 470-300 is recommended for most commercial FRP fabrication processes including hand lay-up, spray-up, pultrusion and resin transfer molding. The higher viscosity of MOMENTUM DERAKANE 470-300 resin facilitates filament winding and contact molding applications. DERAKANE 470HT-400 resin can be used for even higher temperature applications. storage
It is highly recommended that all material is stored at stable temperatures below 25°C (77°F).
Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Mild
mixing is recommended after prolonged storage. Rotate stock.


Product Parameters TYPICAL LIQUID RESIN PROPERTIE
Typical properties(1) of a postcured 6 mm (1/4") laminate(10) at 25°C (77°F).

Tensile Strength	130 MPa	ISO 527	19,000 psi	ASTM D3039
Tensile Modulus	12,000 MPa	ISO 527	1700 kpsi	ASTM D3039
Flexural Strength	210 MPa	ISO 178	30,000 psi	ASTM D790
Flexural Modulus	8500 MPa	ISO 178	1200 kpsi	ASTM D790
Glass Content	40%	ISO 1172	40%	ASTM D2584

Typical properties(1) of a cured casting(8) at 25°C (77°F).

Tensile Strength	85 MPa	ISO 527	12,500 psi	ASTM D638
Tensile Modulus	3600 MPa	ISO 527	5.2 x 105 psi	ASTM D638
Tensile Elongation at Yield	3-4%	ISO 527	3-4%	ASTM D638
Flexural Strength	130 MPa	ISO 178	19,000 psi	ASTM D790
Flexural Modulus	3800 MPa	ISO 178	5.5 x 105 psi	ASTM D790
Density	1.17 g/cm³	ISO 1183		ASTM D792
Volume Shrinkage	8.3%		8.3%
Heat Distortion Temperature(9)	150°C	ISO 75	300°F	ASTM D648
Glass Transition Temperature, Tg2	165°C	ISO 11357	330°F	ASTM D3418
Barcol Hardness	40	EN 59	40	ASTM D2583

15 +/- 5 minutes	1.50		0.25
30 +/- 10 minutes	1.50		0.12
60 +/- 15 minutes	1.50		0.07
Geltime at 20°C (68°F)	Trigonox 239A (phr)		Cobalt6% (phr)
15 +/- 5 minutes	1.25		0.20
30 +/- 10 minutes	1.00		0.10
60 +/- 15 minutes	1.00		0.06
Geltime at 25°C (77°F)	Trigonox 239A (phr)	Cobalt6% (phr)	2,4-P (phr)
15 +/- 5 minutes	1.00 0.15		---
30 +/- 10 minutes	1.00 0.07		---
60 +/- 15 minutes	1.00 0.05		0.01

Application

Our Advantages Why Choose Us?
1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .
2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.
3.Corporate With World Famous Brand, Quality Assured, Cost Effective .
4.Professional And Strong Technical Support.
5.Full Line Nouryon Brand Peroxides
6.Hot Chemicals, Short Of Supply Chemicals, We Have .
7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
Production Process
Company Profile Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.
We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.
Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.
Certifications
FAQ