Wire Touch iButton Ds1990A-F5 RW1990 RW2000 TM01 Dallas iButton Key

Product Description

Product Description:
The TM1990A-F5 electronic iButton key with unique 64-bit code is a full quality analog of Dallas/Maxim DS1990A-F5 iButtons. Designed for access control systems each key has a unique family code that is recorded while the key is being produced and the code cannot be overwritten.
While manufacturing such devices in the factory, the number is directly assigned directly to the production line. Each TM1990A-F5 is assigned a unique identification code consisting of numbers and letters. The approximate number of combinations - 4 billion. Therefore the chance to guess the key from the entrance is practically zero. The key contains a number. It can not be charged or magnetized. But it can be stored in the memory controller, which controls the door to the entrance or office.
When you touch the ibutton reader with a TM1990A-F5 key, it reads this code and passes it to the controller, which checks with the internal memory for its presence in the database. If the identifier with the code is found, the access rights are checked (in some systems there may be time constraints) and give the actuators (locks, latches, latches or relays) the command to open/close.
The main advantages of TM1990A-F5: Electronic keys provide 100% uniqueness. The use of such tablets can significantly reduce the cost of programming a large number of keys for staff. TM1990A-F5 is for use as a workpiece for copying is not intended. (To copy the DS1990A and TM1990A keys, use our RW1990 copy iButtons).
Product Characters:

Item	TM Card,TM iButton
Materal	ABS ,Stainless Steel
Size	16.25*5.89mm
Chip	TM1990A-F5,RW2004,RW1990,TM01A
Memry	64bits
Read-Write Method	Contact
Working Temperature	-40 ~ +85 degree
Sort	Common TM card,magnetic TM Card
Crafts	Engraving
Colors	Red, green, blue, yellow, black, etc
Application	Intelligent Community, Postal Service, Railway St, etc.