High Power Waterproof IP66 100W 150W 200W 250W Stadium Light LED Flood Light with Wide Coverage and Adjustable Angles

Product Description

High Power Waterproof IP66 400W LED Flood Lights with Wide Coverage and Adjustable Angles in Any Weather Condition
Feature

IP66 High power LED Flood light Input:100-277V Pure Aluminum shape good at heat dissipation Angle Bracket,easy to install by drill Easy replacement and installation Phili SMD 3030 Ra>80/R9>0/SDCM<6 100,000 times switching cycle before failure Total harmonic distortion(THD)<15% Product characteristic
LED flood lights are energy-efficient, high-power lights that provide bright and uniform illumination for indoor and outdoor use. They come in various sizes, shapes, and colors, and can be fixed or adjustable to suit different lighting needs. They are eco-friendly, long-lasting, and suitable for general, accent, and security lighting in homes, businesses, and public spaces.
Specification

Power(W)	Light Source	LED Qty(pcs)	CCT	Lumen(LM/W)	CRI	Beam Angle
20W	3030	16	4000K	130	>70/80	120°
30W	3030	32	4000K	130	>70/80	120°
50W	3030	48	4000K	130	>70/80	120°
100W	3030	96	4000K	130	>70/80	120°
150W	3030	160	4000K	130	>70/80	120°
200W	3030	240	4000K	130	>70/80	120°
250W	3030	240	4000K	130	>70/80	120°
300W	3030	320	4000K	130	>70/80	120°
400W	3030	510	4000K	130	>70/80	120°

Dimension
Product installation


Application

COMMERCIAL LIGHTING	PUBLIC LIGHTING	INDUSTRIAL LIGHTING
Tunnel	Tunnel	Manufacture
Supermarkets	Airports	Warehouses
Large retailers	Stadium	Parking lots
School	Train stations	Exhibition centers
Billboard	Bus stations	Gas stations
Building	etc.	Toll stations
etc.		etc.

Packaging

Matters needing attention

Before installing the lighting fixtures, please read this instruction manual carefully. 1. The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations. 2. Lamps should always be installed or replaced carefully. 3. Please check the local voltage in accordance with the product requirements before installation. 4. Revamping only can be done when the power is off and the lamp is completely cooled down. 5. When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly. 6. Don't cover the fixtures with flammable materials. 7. Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.