Module spare parts 190055 190055-0Z-01-01-01

Product Details

Product Description

Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

190055 190055-0Z-01-01-01

Power supply error High Power supply is failing. Main power supply is not available. The ventilator is powered by the battery. • Prepare to disconnect the patient from the ventilator and manually ventilate. • Check main power supply connections. • Contact an authorized service representative. Ppeak high High Measured airway pressure is greater than Pmax. Airway pressure is greater than Pmax. • Check for an occlusion in the patient circuit. • Check for an occlusion in the patient circuit filters. • Review the ventilator settings. • Review Pmax or the Ppeak high alarm limit in Alarm Setup. Ppeak low High2 Measured peak airway pressure is less than the Ppeak low alarm limit. Peak airway pressure is less than the low alarm limit. • Check for leaks in the patient circuit or airway. • Review the ventilator settings. • Review the Ppeak low alarm limit in Alarm Setup. Primary audio error High4 An error was detected with the speaker. The primary audio speaker is not working. (The backup buzzer sounds during this alarm.) • Contact an authorized service representative. Relief valve opened High Valid pressure data reached an extreme level in the patient circuit. High airway pressure detected. Ventilator opened relief valve to relieve pressure. • Check for an occlusion in the patient circuit. • Check for an occlusion in the patient circuit filters. • Check for an occlusion in the expiratory flow sensor. • Review the ventilator settings. • Review Pmax or the Ppeak high alarm limit in Alarm Setup. • Replace inspiratory safety guard.