PACIFIC SCIENTIFIC PC3406AI-001-E

Product Details

Product Description

Product Description
Brand:PACIFIC SCIENTIFIC
Type:PC3406AI-001-E
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,
Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
Satt I/O Communication Interface Galvanic isolation Yes Status indicators Run normally green, FAIL exceptionally red, COM A/COM B Connector BNC Current consumption (from CEX-Bus 24 V DC) 120 mA typical (200 mA max.) Power dissipation 2.9 W typical Capacity Up to 3968 binary I/O channels Protection Rating IP20 according to EN60529, IEC 529 Weight 700 g (1.5 lb) (package CI865xxx with CI865 and TP865) Dimensions W 59 x H 185 x D 127.5 mm (W 2.9 x H 7.3 x D 5.0 in)
CI867 and TP867 – Modbus TCP Interface Key Features • Provides one 10/100Mbps Fast Ethernet port, (RJ45 connector located on the TP867 Baseplate). • Provides one 10Mbps Ethernet port, (RJ45 connector located on the TP867 Baseplate). • Simple DIN-rail mounting. • Provides communication with Modbus TCP protocol via Ethernet. • Pre-set, two-letter Alpha code locking device installed in unit base prevents mounting of incompatible components. • Supports hot swap. Description The CI867/TP867 can be used to connect an AC 800M controller to external Ethernet devices using Modbus TCP protocol. The TP867 Baseplate has two RJ45 Ethernet connectors, where CH1 connector can use 10Mbps or 100Mbps (Mega bits/sec.) and CH2 use10Mbps only. The baseplate has a code lock (see Table 4 on page 75) that prevents the installation of an incorrect type of unit onto the TP867 Baseplate. The CI867 expansion unit contains the CEX-Bus logic, a communication unit and a DC/DC converter that supplies appropriate voltages from the +24 V supply via the CEX-Bus. The Ethernet cable must be connected to the main network through an Ethernet Switch.