cross flow cooling tower fill/trickling filters

Product Description

Product Description
Product Details
cross flow cooling tower fill/trickling filters
Cross Fluted Fills improve water distribution by splitting the water stream as it descends through the fill pack. The CF1200 MA splits the water stream 10 times in a 11.8” (300 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.
Product Introduction
cross flow cooling tower fill/trickling filters• Bevel Tips promotes drainage at fill pack interfaces. Note: Packs are always installed with Bevel Tips at bottom of pack.
•Patented "MA"(Mechanical Assembly) Technology for glue-free packs.
• Engineered microstructure for improved water distribution and thermal mixing
• High thermal performance
• Improved water distribution
• Proprietary edge trim that directs water to both sides of sheet
• Material meets Cooling Tower Institute (CTI) Standard 136
• Available in PVC
Product Details Show
Product Processing
Product Packing
Similar Products
ML Cooling tower fills
EAC cooling tower fills
LC cooling tower fills
Air inlet louver
Round cooling tower fills
Drift eliminator
Welcome your inquiry about our cross flow cooling tower fill/trickling filters , we will reply you within 24 hours. With best service and favorable price. :-）Cathy is always hereWhatsapp: 0086 15831926580
Email: cathy(at)