Paint Aggregates Decorative Acrylic Color Flakes Chips Flecks

Product Description

Product Description
Acrylic Flake Usage: Acrylic Flake blends of the color of your choice. For use with epoxy floor
coatings, create a full or partial flake floor, or mix colors to suit your desired look. Brightens or
soften the environment by controlling the color and texture of the floor.Physical characteristics:
hard platelets, tasteless or slightly irritating odor.
Acrylic flake is a new type of materials used in interior that developed by our company. It widely
used in epoxy floor, unsaturated polyester, artificial stone counter-tops, polyester sheet, acrylic
sheet, aluminum panels, wood floor and water-based latex paint and so on. Traditional floor single
color, color effect monotonous, can not achieve colorful effect. Our acrylic flake can show high-grade
granite texture effect through different colored acrylic flakes and simple process . Acrylic flake fully
integrated with resins, it make products surface colorful, show fashion charm, increase products
added value. Acrylic flakes construction easy, better quality, lower cost, natural color, it's a new
composite material with multiple advantage, and it's also indispensable raw materials for above
manufacturers.Color Chart
Installation InstructionsTips: Tools required for the thin colorful flakes wall painting are: roller, spray gun, air compressor,
paint brush and adhesive tape. Such tools are generally used and it can be bought from every
building materials shop or DIY store.
1. Wall paint
1.1. Steps
(1) Have emulsion varnish coated on the wall with your roller and repeat again after drying. Then
draw from the top of wall space at a size of 1.5m x 1.5m block (top down order)
(2) Once every block fully painted, start to spray rock slice 15 cm away from the joint with your
spray gun at a distance of 50 cm from wall space.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After being completely dry, to clear the rock slice which is not entirely adhered by using your
paint brush.
(6) Painted with transparent finishing coat so as to protect surface.1.2. Size: 1-3mm, 1-5mm irregular flakes
1.3. Recommended dosage: 100g-250g/m2
1.4. Precaution:
(1) Please pave plastic cloth or paper for peeled rock slice recycling.
(2) To keep interface dry and clean. Free of grease, dirt, dust and protrusion. Moisture content has
to be below 10% for construction.
(3) Luxury indoor emulsion varnish is applicable.
2. Ground paint 2.1. Steps:
(1) When undercoat is dry, to spray floating coat in the roller at block size of 1.5mx1.5m from the
corner of inboard.
(2) To spray rock slice over the block one by one. Spray gun: to spray rock slice 15 cm away from
the joint with your spray gun at a distance of 50 cm from wall space.Hand: to drip upslope for rock
slice natural drop-down.
(3) To have the joint coated with emulsion varnish again and spray rock slice accordingly.
(4) To finish execution of works by repeating above steps.
(5) After the floating coat being completely dry, painted with transparent finishing coat with roller
brush for surface protection.2.2. Size: 1-3mm, 1-5mm irregular flakes
2.3. Recommended dosage: 100g-250g/m2
2.4. Precaution:
(1)To keep interface dry and clean. Free of grease, dirt, dust and protrusion. To fill the pit and crack.
Moisture content has to be below 10% for construction.
(2) Floating coat, Finish, Undercoat: you can choose Epoxy resin (EPOXY) or Polyurethane(PU) system.
(3)Fill the vessel with rock slice (approx. two thirds full), and put the straw of spray gun into the vessel.
Make its duct connected with air compressor (please use voltage regulator, pressure setting at 2~3kg/cm2)
Packaging & Shipping
-------25 KGS Per Carton; 36 Cartons Per Pallet ( 900 KGS )
-------25 KGS Per Carton Drums; 18 Drums Per Pallet ( 450 KGS )
Company ProfileJiangxi Tiansheng New Materials Co., Ltd was built in 2006, which located in a
beautiful city JI'AN in Jiangxi Province China. It is a leading manufacturer of decorative granite flakes.
The factory is more than 15,000 square meter, with advance equipment and rich-experience R&D team.
Products are exported to all over the world with first class quality, which makes TIS have a good reputation
worldwide.
FAQ1. Who are we?We are based in Jiangxi, China, start from 2006,sell to Domestic Market(25.00%),North America(25.00%),
Eastern Europe(20.00%),South Asia(8.00%),Southeast Asia(8.00%),SouthernEurope(7.00%),Oceania
(3.00%),Africa(2.00%),South America(1.00%),Mid East(1.00%). There are total about 101-200 people in
our office.2. How can we guarantee quality?Always a pre-production sample before mass production; always final Inspection before shipment.3.What can you buy from us?Manufacturing vinyl flake chips, granite flakes paint.
4. Why should you buy from us not from other suppliers?
We have a strong group of technology and perfect service system engaged in R&D and various additives.
We has over ten senior engineers and forms strong ties with research institute for deep research work.We
have complete R&D base and manufacturing base.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW, Express Delivery;
Accepted Payment Currency: USD, CNY, EUR and so on;
Accepted Payment Type: T/T,PayPal,Western Union;
Language Spoken:English,ChineseCertifications
Conract USUna Liu
Company: Jiangxi TianshengADD: Post Code 343009, Indust rial North Road, Hedong Economic Development Zone, QingYuan District, JI'AN City,Jiangxi Province, China.