Module spare parts PPC380AE102 HIEE300885R0102

Product Details

Product Description

Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

PPC380AE102 HIEE300885R0102

• Storing the operator panel where the temperature is lower/higher than recommended in this manual can cause the LCD display liquid to congeal/become isotopic. • The LCD display liquid contains a powerful irritant. In case of skin contact, wash immediately with plenty of water. In case of eye contact, hold the eye open, flush with plenty of water and get medical attention. Section 2 Safety Precautions During Installation 3BSE043446R501 11 • The figures in this manual serves an illustrative purpose. Because of the many variables associated with any particular installation, the supplier cannot assume responsibility for actual use based on the figures. • The supplier neither guarantees that the operator panel is suitable for your particular application, nor assumes responsibility for your product design, installation or operation. During Installation • The operator panel is designed for stationary installation on a plane surface, where the following conditions are fulfilled: – no high explosive risks. – no strong magnetic fields. – no direct sunlight. – no large, sudden temperature changes. • Install the product according to the accompanying installation instructions. • Ground the product according to the accompanying installation instructions. • Only qualified personnel may install the operator panel. • Separate the high voltage, signal and supply cables. • Make sure that the voltage and polarity of the power source is correct before connecting the product to the power outlet. • Peripheral equipment must be appropriate for the application and location. During Use • Keep the operator panel clean. • Emergency stop and other safety functions may not be controlled from the operator panel. • Do not use too much force or sharp objects when touching the keys, display etc.