Mono-Crystalline Diamonds Polishing Tools Cutter Milling Tool Pressure Burnishing Tools

Product Description

WHAT IS BURNISHING?
Burnishing is a chipless machining method which cold works the metal without cutting or abrading the surface.
It removes no metal but rather compresses, or "irons-out" the peaks of a metal surface into the valleys, generating a dense and uniform surface.
Roller burnishing improves surface finish and results in dimensional accuracy.
Burnishing is the best way to improve a surface finish, enhance part quality and eliminate costly finishing operations. Eliminate secondary operations, improve surface finish and save time and money with our burnishing tools.
Our team has worked with thousands of different applications. If you have a question or are wondering if your application is a good fit for burnishing, please feel free to contact us.
Pressure burnishing tool instructions
Characteristics of rolling processing:
1. Hard alloy roller has long service life.
2. High rolling efficiency, high finish.
3. Can effectively improve the surface hardness of machined workpieces.
Rolling amount:
1. Rolling speed: V=100-200min (increase).
2. Feed quantity; S=0.1-0.2mm/rev (complete at one time).
3. Roll interference: 0.01mm9 single sided).
4. Actual press volume: 0.01-0.02MM.
Matters needing attention:
1. The center of the roller should be equal to the center of the workpiece axis.
2. Rolling surface and workpiece axis surface, rolling must be clean, no oil pollution.
3. Rolling must be completed at one time, repeated rolling will produce spots and peeling.
4. Rolling the small plane and parts of the shaft should be 1 degrees -15 degrees Cross (double axis intersection).
5. When lubricating and burnishing the liquid (Kerosene or engine oil is recommended) must be cleaned, and the burnishing effect will be better.
FAQ

Q1. What is your terms of packing? A: Generally, we pack our goods in neutral carton and wooden case. We also can pack the goods according to your instruction including out package and kinds of labels.

Q2. How about your delivery time?A: Generally, it will take 5 to 7 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q3.What is your terms of payment?A: Usually do T/T, L/C or Western Union,T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings.

Q5. Do you test all your goods before delivery?A: Yes, but you will be always welcome to our company to inspect the goods before delivery.