PVC Cellular Air Inlet Louvers PVC Raw Material Cooling Tower Drift Eliminator

Product Description

Product Description
PVC Cellular Air Inlet Louvers PVC Raw Material Cooling Tower Drift Eliminator Cooling Tower Drift Eliminator are designed to capture large water droplets caught in the cooling tower air stream. The eliminators prevent the water droplets and mist from escaping the cooling tower. Eliminators do this by causing the droplets to change direction and lose velocity at impact on the blade walls and fall back into the tower. Efficient drift eliminators will keep drift losses to less than .001% of the re-circulating water flow rate. Cooling Tower Drift Eliminator are used to control water loss from a cooling tower by limiting the amount of circulating water droplets that are emitted with the exhaust air of the tower. Since drift droplets contain the same chemical and particulate matter of the circulating water from which they originate, they can cause numerous detrimental effects on surrounding equipment and the environment. The cooling tower industry uses drift rate to compare drift eliminator performance, a relationship that correlates droplet capture efficiency to the water circulation rate in a tower. Our drift eliminators are specifically designed to achieve maximum drift removal efficiency in both crossflow and counterflow tower applications with various product options available to minimize pressure drop, drift loss, cost, or a combination of all three. Drift Eliminators, made out of rigid PVC, are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the Drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator.For Cross flow tower applications, the almost vertical water conduits provided by the DE drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry.The special locking pin arrangement for DE facilitates quick and simple assembly at site. specification MaterialPVCLengthas your requiredWidth63/65/120/130mm as your required Detailed image S wave / M wave cooling tower parts Drift Eliminator detials Drift Eliminator characters:1. Maximum operational safety;2. Legal compliance;3. Original therml performance of your cooling equipment;4. Easy cleaning;5. Dry surrouding by minimum drift emission. Drift Eliminator blade type benefits:1. Maximum drift capture through efficient design2. Light weight3. Easy to handle, lift and remove for inspection and service of water distribution system and heat transfer surface (fill and coil)4. Nested modules to guarantee watertight seam5. Corrosion free6. Perfect fit: model specific size kits Other type drift eliminator Please contact us at any time!