IS420UCSBH4A

Product Details

Product Description

Product Description
Brand:GE
Type:IS420UCSBH4A
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,
Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
Current consumption (from CEX-Bus 24 V DC) 200 mA max. External supply voltage 17 V minimum 25 V typical 30 V max Protection Rating IP20 according to EN60529, IEC 529. Approval CE-marked and meets the requirements specified in EMC Directive EMCD 2004/108/EC according to the standards EN 50081-2 and EN 61000-6-2.
CI860 and TP860 – FOUNDATION Fieldbus High Speed Ethernet Key Features • Provides one Ethernet port, (RJ45 connector located on the TP860 Baseplate). • Simple DIN-rail mounting. • Provides communication with FOUNDATION Fieldbus High Speed Ethernet devices via Ethernet. • Pre-set, two-letter Alpha code locking device installed in unit base prevents mounting of incompatible components. • Supports FF HSE redundancy. • Supports hot swap. Description The CI860/TP860 can be used to connect an AC 800M controller to FOUNDATION Fieldbus High Speed Ethernet through TCP/IP via Ethernet. The TP860 Baseplate has one RJ45 Ethernet connector to connect the unit to the FOUNDATION Fieldbus High Speed Ethernet. The baseplate has a code lock, see Table 4 on page 75, that prevents the installation of an incorrect type of unit onto the TP860 Baseplate. The CI860 expansion unit contains the CEX-Bus logic, a communication unit and a DC/DC converter that supplies appropriate voltages from the +24 V supply via the CEX-Bus. The Ethernet cable must be connected to an Ethernet device. To operate FOUNDATION Fieldbus H1 devices with the CI860 these H1 devices must be connected via a FOUNDATION Fieldbus Linking Device (for example LD 800HSE) to adapt them to FOUNDATION Fieldbus High Speed Ethernet.