100% Solid Anti-Corrosion Rigid Polyurea for Drinking Water Pipes

Product Description

JHSW8604 100% Solid Anti-Corrosion Rigid Polyurea for Drinking Water Pipes is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic polyurethane elastomer. JHSW8604 is non- toxic, Can be used for the inside and outside of metal pipe or other substrate surface protective coating, lining, wear resistant layer and buffer layer.
Advantages: Fast cure, short down time, no sagging Excellent Physiochemical Properties Good adhesion on steels without primer 100% Solids, No VOC's, Odorless None toxic, can be used in drinking water device, get WRAS approval Good resistance to a wide range of chemical attack Good heat resistant, heavy duty and Durability Seamless, flexible, slick and non-porous Recommended Uses:
JHSW8604 100% Solid Anti-Corrosion Rigid Polyurea for Drinking Water Pipes can be widely used in Oil & Gas Transmission, inside or outside of steel or concrete pipe, Industrial Facilities, and so on.
Properties:

Tensile Strength /MPa	≥30	Solids Content/%	100
Elongation/%	≥20	VOC	0
Tear Strength/( N/mm)	≥70	Gel Time/s	50-60
Shore Hardness	≥75 D	Tack Free/ s	80-120
Adhesion /(Pull off, steel,MPa)	≥10	Shelf Life	12 months, unopened at 0~40 ºC
Density/( g/cm3)	0.95~1.05	Flash Point/ ºC	>100
Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g)	≤0.03	Mix Ratio V/V	1: 1
Impermeability(0.3MPa/30min)	Impervious	Recommended Spreading Thickness/mm	2~3
Chemical Resistance	No corrosion, No Blister, No Spalling	Colors:	Optional