China hoist smokeless barbecue lump wood charcoal furnace machine to make charcoal

Product Description

Product Description
China hoist smokeless barbecue lump wood charcoal furnace machine to make charcoalProduct DescriptionMachine to make charcoal intrduction:This China hoist smokeless barbecue lump wood charcoal furnace machine to make charcoal can carbonize different biomass materials into bbq charcoals. For example: Wood, bamboo,sawdust, rice husk, straw and stalk, coconut shell, peanut shell, olive wastes, sugarcane,ect. You can put lump materials into furnace directly, and get natural biomass charcoal after 10-12hours.Structure of machine to make charcoalThis machine is easy to operate and it has big capacity.♦ Ourter stove♦ Inner stove♦ Cover♦ Hoist♦ Purify systemAdvantages of charcoal machine:♦ No need electricity♦ Big capacity: 1000kg-9000kg charcoal per day♦ Energy saving♦ It has air cleaning system♦ It includes hoist which can load and unload Inner pot easily.Data of China hoist smokeless barbecue lump wood charcoal furnace machine:ModelPowerCapacityWeightMain structureTHL-10.75kw2-3t/24h4t1*outer furnace, 3*Inner pots,3*covers1*purification tank, 1*3t lifting deviceTHL-20.75kw5-6t/24h8t2*outer furnaces, 6*Inner pots, 6*covers2*purification tank, 1*5t hoist equipment with e-motorTHL-30.75+1.5kw7.5-9t/24h12t3*outer furnaces, 9*Inner pots, 9*covers3*purification tank, 1*5t hoist equipment with e-motorTHL-40.75+1.5kw10-12t/24h16t4*outer furnaces, 12*Inner pots, 12*covers4*purification tank, 1*5t hoist equipment with e-motor Old design machine to make charcoal New design machine to make charcoalHow to produce charcoal? It devides three processes:1. HeatAfter sealing work, use woode wastes or gas to heat furnace. Primarily, 10 minutes big fire to burn, when temperature reach 90 degrees centigrade turn to use slow fire to heat.It takes 80-120minutes for this process to reduce water vapor from your materials.2. PyrolyseKeep heating, when the temperature reach 180-235 degrees centigrade for 3-5hours, it will produce gas from this process. Reuse this gas as fuel to heat.The whole process is about 8hours. When the temperature reach highest and it reduces, the dry distillation process will finished.3. CoolingHang the Inner pot outside, and seal the pipes of cover. Let it cool naturally. Cooling time is longer, the quality of charcoal is good.When the temperature lower than 50 degree, you can take charcoal out. Otherwise, the charcoal will burn again when met oxygen of air. Our machine to make charcoal detailsInside refrectory bricks: good quality bricks, AlO3 is more than 70%Final wood charcoal from machine to make wood charcoal Nut shells charcoal from our machine to make wood charcoalPackaging & Shipping Delivery of machine to make wood charcoalOur Services1. 24 hours online service2. We can design the machine and provide drawing paper depends on your facts3. Engineer available to install machinery overseas4. We will pick you up at airport or railway station when you come to visit our factory Company uphold: honesty, quality first, customer first for the purpose.Certificate Our factoryFAQ Questions:1. What is capacity of your machine?--- One inner pot can load 2.5tons machine-made briquettes, 8hours will get one ton machine-made charcoal. one Inner pot can load 2tons natural wood, 8-10hours will get 600kg-800kg natural charcoal. Therefore, one furnace can get: 3tons machine-made charcoal, 1.8-2.5tons natural wood charcoal.2. What is carbonization time?--- Normally, 8-10hours. If your natural wood is fresh, it takes long time to remove moisture of wood, therefore, carbonization time is longer.3. When the charcoal is finished?--- There is no smoke and smoke is blue lucid,the process is finished.4. How many times should we cool the cahrcoal?It takes 10-16hours. When the inner pot goes down to 50℃ or less, charcoal can be packaging and collecting. If you are interest in our machine contact me at any time. China hoist smokeless barbecue lump wood charcoal furnace machine to make charcoal