Oil Purifier Oil Purification Machine Oil Filter Oil Filtration Machine Oil Regeneration

Product Description

It is an upgraded version of the DTS multifunctional decolorization and purification all-in-one machine. It can achieve waste oil purification at temperatures below 100 degrees without damaging the oil film and ensuring the highest oil quality.
This machine can effectively restore a single waste oil (including lubricating oil/anti-wear hydraulic oil/engine oil/gear oil/chain oil), making the waste oil index reach the standard of new oil, and put it into use in the original equipment without causing any damage to the original equipment.
Due to the use of the latest flocculation technology, this machine does not have a filter element! No filter element! No filter element!
Without a filter element, there are no consumables that need to be replaced frequently, saving processing costs and the cost of manual replacement or cleaning of the filter element.
Detailed Photos

Competing Industry Equipment	Our Company's Equipment	Comparative Advantages
Filter elements or paper filters	No filter elements	Reduces consumable costs, eliminates the need for filter cleaning, easy to operate, saves time
High electricity consumption	Energy-efficient	Uses electromagnetic induction, saving 50% on electricity
Direct heating	Constant temperature indirect heating	Constant temperature heating protects the oil quality, preventing rapid aging of the oil
High-temperature direct heating	360-degree indirect surround heating	Significantly improves safety
Physical filtration	Flocculation purification	Can purify nanoscale impurities
Direct evaporation to remove moisture	Flocculation adsorption of moisture	Saves energy, maintains the essence of the oil, does not produce sludge
Cannot process heavily soiled oil	No restrictions	Broad processing range, strong processing capability

Processed oil color is similar to waste oil	Processed oil color is 99.9% similar to new oil	Processed oil does not change color
Can only accept moisture and mechanical impurities	Meets national standards (GB)Can accept all indicators	Allows customers to send samples for laboratory testing of all indicators
Processed oil can only be used in simple cooling systems	Reusable in the original system and equipment	Can be used repeatedly in cycles
Degradation of oil quality	No degradation of oil quality	Reduces the cost of purchasing oil

Company Profile
Chongqing Fangsheng Purification Equipment Co., Ltd. has been committed to the research and innovation of regeneration and recycling technologies for industrial waste oil and chemical solvents since its establishment in 2007. The recycling rate of products processed by our company's equipment can reach over 99%, with almost zero emissions, providing a good solution for enterprises to reduce costs and increase efficiency, and effectively promoting the development of environmental protection and resource recycling.
Collaborative clients
FAQ

Q: Will the anti-wear factor in the lubricant be damaged or lost after being decolorized and filtered by the equipment?
A: As DTS6 operates at medium to low temperatures, it can completely restore its appearance and kinematic viscosity without damaging its anti-wear factor.

Q: What is the replacement cycle for the filter element of DTS-6
A: DTS-6 adopts the latest technology. No need to replace the filter element, just clean it regularly.

Q: What is the oil yield of DTS-6?
A: 90% -99%. The specific oil yield should be determined based on the raw materials.

Q: What is the degree of reduction of waste oil that can be achieved?
A: Due to our globally leading products, we are able to reduce oil products to 99.9% using the latest technology.
Q:What types of oil can DTS handle
A: DTS can process used single type waste oil (including lubricating oil/gear oil/chain oil/hydraulic oil, etc.)
Q:Can DTS handle waste oil mixed with multiple varieties
A:Unable to process