Gold Silver Copper and Diamond Integrated Machine Meta Detector

Product Description

New 3D Black Hawk folding display screen, built-in rechargeable battery, can be repeatedly charged and used.
Product parameters:
Model: New 3D Black Hawk folding display screen
Input voltage: 100-240VAC-50/60Hz
Output voltage: 12.6V-1A
Application: Copper, silver, gold, diamond positioning
Search range: 1-1500 meters
Maximum detection depth: 1-50 meters
Working time: 10 hours
Charging time: 8 hours
Specific functions:
It can accurately determine the buried position of the object by fixing the point, and can locate it.
It can also rely on the frequency regulator to identify the specific type of metal.
Operation method
Because the hand-held handle of the instrument will rotate freely, the wind will interfere with the machine. Therefore, the instrument will be interfered with to a certain extent when used in windy conditions. The use effect of this instrument is closely related to the operator's control skills for scanning.
Remove electronic objects and copper, silver, gold, and diamond objects from your body at home to avoid interfering with the machine during operation. Determine the area to be scanned, turn on the machine, and hold the machine pointer in contact with the ground for about one minute to remove the static electricity of the machine. Then choose a comfortable posture to stand on the ground, hold the instrument with your hands, and keep your elbows close to the sides of your body. Note: You must keep the instrument in front of your body, allow the receiving antenna to have enough space to unfold, and let the antenna tilt slightly downward from the horizontal line. This angle is about 7 to 10 degrees.
undefined
1. Standardize your scanning action. First, let the receiving antenna stretch out correctly. Make the receiving antenna unfold in front of you at 90 degrees to your body, and the machine cannot deflect to the left or right.
undefined
2. When the antenna is aimed at the target, the instrument will lock, even if you cross the target and continue to detect. When you think this lock is effective, you will remember this direction. Then, move the instrument about 10 meters to the left or right, and repeat the process of locking the target just mentioned. Observe the direction of this lock, and the intersection of the two directions is the buried location of the target. The more direction points are determined, the more accurate the result will be.
undefined
3. If you feel that the specific position just measured is still offset, you can lock it from another angle. If the target is within about 10 meters, you can walk slowly and steadily along one of the specified routes. When you pass the target and are directly above it, the antenna of the instrument will swing from side to side. At this time, the measured position is very accurate.
undefined