Fast Curing General Purpose Acetic Silicone Sealant in Tube for Glass Aluminium Windows and Doors

Product Description

S-363 Fast Curing General Purpose Acetic Silicone Sealant in Tube for Glass Aluminium Windows and Doors
Characteristics:
1. One component
2. Fast acid curing, high strength
3. Non-discoloring.
4. Excellent adhesive for Aluminum doors and windows and most building materials.
5. Excellent resistance to low and high temperature, little performance changes between -10 ºC~120 ºC
Application:
1. Wide range of aluminum doors and windows;
2. Use for plastic steel, glass, aluminum sheet and ceramics;
3. For plastic steel, glass, aluminum sheet and ceramics family decoration caulking and sealing.
Limitations:
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6ºC or above 40 ºC

Construction Steps
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water,go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.

Color available:
White, Grey, Transparent, Bronze

Curing Time:
Track-free Time is between 5 to 15 minutes at room temperature
Completely curing Time is between 24 hours to 72 hours at room temperature.

Packaging:
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 340g Net weight: 280g

Storage and transportation:
12 months stored in a dry and ventilated place below 27ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB/T 14683-2003
TECHNICAL DATA SHEET

No	Item			The standard	Test result
1	Appearance			Have no grain, no agglomerations, no skinning, no bubble.	Pass the standard
2	Density (g/cm3)			±0.1	0.940
3	Droop degree (mm)	Uprightness		≤3	0
		Level		No damage	No damage
4	Skinning time (h)			≤3	0.2
5	Elastic recovery ratio ( %)			≥80	98
6	Extrusion ability, ml/min			≥80	105
7	Tensile modulus (Mpa)		23ºC	≤ 0.4	0.36
8	Cold-hot adhesive			No damage	No damage
9	Under water adhesive			No damage	No damage
10	UV radiation			No damage	No damage
11	Definite Elongation			No damage	No damage

The CSJ Silicone Sealant Advantage
Certificate
FAQ:
1.Can u send sample to us ?
Yes, the sample is free to you to do the test.

2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.

3.Where is your port?
Guangzhou/Foshan

4.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.

5.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.

6.How many days to produce one 20'container?
Maxinum 15 days

7.Can we visit factory?
Yes, warmly welcome to visit us at any time.

8.Documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.