Hair Transplant Kit Complete Fue Kit

Product Description

The instructions of Follicular Unit Extraction FUE Hair Transplantation device
Micromotor handpiece
1.Can adjust intermediate silvery white part,turn to the upper rotating, head clip mouth open, at this time, put accessory into the the gap, and then spin to the right, the gap closed, will clamp tight, then can supply power to work.
2.When turning the handle to the upper middle silver parts, head clip mouth open, at this time can not turn on the power.
3.Handle part only adjustable intermediate silver part, black and gray part can not be adjusted.
Main operating instructions:
1.All parts are one-on-one interface
2.If use foot switch, must step foot that can work.
3.The power supply of main control button, before they leave the factory has been adjusted, red plate have shown that 220 v voltage, please don't change without permission. If your country voltage is 110 v, you can change it till red plate show 110v.
Sterilization method:
accessories can be high temperature and high pressure sterilization, for other part,use fumigation or with alcohol disinfection,then pack in one-time sterilization bag seal. Ban soak.
Stardard list:

1. Motor: 1pc

2. Electric handle: 1pc

3. Implantation needle: 10pcs

4. Tweezer: 2pcs (straight head and elbow head)

5. Implantation pen: 3pcs (dia: 0.8mm 1.0mm 1.2mm)

6. Silicon block for hair: 1pc

7. Imported implantation knife handle and UK blade: 1 set

8. Foot switch

9. Packing case

10. Instruction DVD