Plate Drift Eliminator Demister Pad Mist Eliminator For Cooling Tower

Product Description

Product Description
Product Description
Plate Drift Eliminator Demister Pad Mist Eliminator For Cooling Tower
What's drift eliminator?
Drift Eliminators, made out of rigid PVC, are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the Drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator.For Cross flow tower applications, the almost vertical water conduits provided by the DE drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry.The special locking pin arrangement for DE facilitates quick and simple assembly at site.

Sheet Width	65mm
		130mm
		145mm
Sheet Length	CustomizedAny Length
Thickness	0.2-0.4mm
Sheet Spacing	25-31mm

Every cooling tower loses a portion of water through evaporation into the environment during operation. Generally when cooling towers are working properly this loss is in the form of water vapor which is pure and poses no harm to the environment. In contrast loss that has mineral and chemicals from the cooling tower is drift. This undesirable loss of water is sometimes caused by the fast moving air carrying it out of the cooling tower. Treated water which is common in cooling towers can in fact pose a negative impact on the surrounding environment.
PVC Drift Eliminator
PVC drift eliminator modules improve air flow into the cooling tower, keep out debris, eliminate water splash-out (which can causeicing, near-site water damage, and costly water and water treatment chemical loss), restrict the amount of sunlight into the cooling tower (to impede algae growth), reduce noise from the tower, and improve the tower's appearance.
Drift eliminator advantages:
1. Maximum drift capture through efficient design
2. Light weight
3. Easy to handle, lift and remove for inspection and service of water distribution system and heat transfer surface (fill and
coil)
4. Nested modules to guarantee watertight seam
5. Corrosion free
6. Perfect fit: model specific size kits
Detailed Images
Related Products
Packing&Shipping
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer with our own factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge. And the freight cost will on the buyer's side.
Q: What is your terms of payment ?
A: Payment<=USD1000, 100% in advance. Payment>=USD1000, 30% T/T in advance ,balance before shipment.