hot sale Wood tree Debarking peeling log debark remove bark Machine made in china

Product Description

Product Description
Factory supply 8T output wood peeling machine 1>This machine is the rotor teeth with stripping produced a unique force, so that wood in the hopper tank plate section of a recurring cycle of movement, but also around its own axis to do wood turning motion segment and irregular beating. To this paragraph with wooden teeth, wood and wood paragraph paragraph paragraph wood and keep the friction between the storage tank, impact, compression, fast bark are separated, to achieve effective peeling effect. 2>One end to put in and the other for outlet , it’s better than the rotary one which have to stop the motor to take the peeled trees out. 3>Can suit for many kinds of different trees , especially for the bend one have more high peeling rate than the traditional rotary type. 4>The machine is fixed when working , so the power consumption and the failure rate is small and with low noise. Wood barker is a new generation wood peeling equipment with high efficiency which was innovated by our factory on the basis of foreign advanced technology. It had single and double roller type according to different wood with different diameter. This machine adopts open groove peeling room, the wood come into the peeling room from one side and come out from the other size. So it is continuous working. It conquer the defect of rolling drum and improve capacity greatly. It is suitable for big diameter wood and large scale factory. Technical data:ModelJx-8000Jx-10000Motor11kw, 3 phases, 380v.50 hz15kw,3 phases,380v,50hzCapacity6-8 t/h10-12 t/hBarking rate> 90%>95 %Log length3-4 m5-6 mLog loss rate< 2%< 2%Log diameterNo limitationNo limitationDiamension8*1.4*1.7 m12*1.5*1.7 m