Epoxy Vinyl Ester Resin with Bisphenol-a

Product Description

Introduction:
MFE 711 is based on bisphenol-A epoxy resin, provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.
Benefits & Properties
•Easier workability, good air drying.
•Shorter gel-to-cure interval, reduced stress cracking,
•The resin's improved reactivity properties often permit an increase in the lay-up thickness per session.
•Higher elongation provides FRP equipment with increased toughness
•Lighter color makes defects easier to see and correct while the resin is still workable.
•Longer shelf life provides additional flexibility to fabricators in storage and handling. Applications and Fabrication Techniques
•FRP storage tanks, vessels, ducts, and on-site maintenance projects, particularly in chemical processing and pulp and paper operations.
•The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications.
•When properly formulated and cured, complies with FDA regulation 21 CFR 177.2420, covering materials intended for repeated use in contact with food.
Typical Liquid Resin Properties

Property (1)	Value
Appearance	Light yellow
Viscosity cPs@25ºC Brookfield 63@60rpm	250-450
Styrene Content	42-48%
Shelf Life(2) Dark, 25ºC	10 months

(1) Typical property values only, not to be construed as specifications
(2) Unopened drum with promoters. Shelf life specified from date of
Manufacture
Typical Properties (1) Resin Clear Casting (3)

Property	Value	Test Method
Tensile Strength/ MPa	80-95	ASTM D-638
Tensile Modulus/ GPa	3.2-3.7	ASTM D-638
Elongation at break / %	5.0-6.0	ASTM D-638
Flexural Strength/ MPa	120-150	ASTM D-790
Flexural Modulus / GPa	3.3-3.8	ASTM D-790
HDT (4)	100-106	ASTM D-648 Method A

(3) Cure schedule: 24 hours at room temperature; 2 hours at 120ºC(4) Maximum stress: 1.8 MPaSafety and Handling Consideration
This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
The specification is 2014 edition and may change with the technological improvement.
MSDS contain health and safety information for your development of appropriate product
handling procedures to protect your employees and customers.
Our MSDS should be read and understood by all of your supervisory personnel and employees before using our products in your facilities.
Package: 200 kg per drum or 1000 kg per IBC
Recommended Storage:
Drums - Store at temperatures below 25ºC. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture
pick-up and monomer loss.
FAQ
Q1.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.
Q2. How can I get a sample from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
Q3. What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
Q4. What is the Guarantee to buy your products? How to resolve quality complaints?
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures /test data. With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
Q5. What are your terms of payment?
A: Usually we do EXW, FOB, CIF, and DDU.