Pq-CD20 Pipe Blockage Detector Depth 20 Meters Long Sink Drain Unblock Pipeline Repair Service Plumbing Work

Product Description

PQ-CD20 pipe blockage detector for 20m This instrument is mainly used to measure pipeline blockage caused by debris such as cement, sand and stones during construction. During the renovation, due to the numerous pipes buried too deep in the floor, once the pipes are blocked, they have to be demolished in a large area, which consumes a lot of labor and financial resources. Using this instrument, you can quickly locate the blocked point, avoid large-scale demolition, and can penetrate a 50 cm thick wall with an accuracy within 5cm. It has the advantages of fast speed, simple operation, stable performance, and long service life. Important Notes: 1.After the instrument is used up, the power must be turned off. 2.After finding the blockage position, please pull the thread out of the tube and put it in a safe place, and then dig out the groove. 3.When used to detect iron pipes, the detection distance is slightly reduced, but it does not affect the use. 4.If the green power lights of the transmitter and receiver are normal, but there is no sound during the test, the transmitter probe should be damaged, please replace the probe. Maintenance 1. Please use a standard 5V 1A charger and a charging cable with a micro USB connector to charge; If you do not use it for a long time, please fully charge the instrument before storing it properly; 2. It is recommended that users charge the battery once every six months to protect the battery of the instrument and prolong its service life. If the instrument has not been used for a long time, please fully charge it before using it.