Modified Epoxy Acrylate Oligomer UV Resin Has Good Plating Property and Good Adhesion to Conventional Basecoat and Plastic

Product Description

Product Parameters

WD307B	WD307B is a bifunctional modified epoxy acrylate oligomer. It is characterized by good flexibility, good adhesion to conventional basecoats and plastics, excellent leveling and fullness, good plating property, and resistance to boiling water.
Functionality	Two
Solid content (%)	100%
Viscosity (CPS/25 ºC)	45000-90000
Appearance(25ºC)	Colorless to slightly yellowish transparent viscous body.
Acid value	≤ 5
characteristic	Good adhesion, good flexibility, good plating property, excellent leveling and fullness, and resistance to boiling water.
Application	Vacuum electroplating primer UV, UV paint for wood. Varnish for paper and UV ink. Varnish for ordinary plastic paint.
package	20KG net weight iron bucket and 200KG net weight iron bucket.
storage	The resin should be stored in a properly sealed container at 0-35 ºC, away from light; Under these conditions, the storage stability of this product should be at least 6 months;
secure	Irritating to eyes and skin; Skin contact may cause allergies; You should carefully read the Safety Data Sheet (MSDS), which includes labeling, transportation, and storage Relevant information, as well as information on product use, product safety, and ecology.
pay attention to	Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet

The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.

Packaging & Shipping
Company Profile
Factory/Production Base
Experimental/Office Area

Certifications

FAQ
A. Are we a factory or a trading company?
b. It is a factory. Our company was founded in 2015, covering an area of 38000 square meters and equipped with advanced automated production equipment. The annual production capacity of synthetic resin is 50000 tons
A. Is the test sample free of charge?
b. The samples are free, you only need to pay for shipping
A. What is the minimum order quantity?
b. Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
Note: The minimum quantity of orders depends on different types of materials. Please contact us.
A. Can we accept OEM of the product?
b. Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.
A. What is the delivery cycle?
b. Delivery cycle - peak season: one month. Delivery cycle - off-season: within 15 workdays
Note (The specific delivery time is determined by the ordered product and quantity)