PVC cooling tower fill media MX75 2980mm*1220mm*0.38mm cooling tower infill

Product Description

Product Description
Product DescriptionMX PVC cooling tower fillThis type of cooling tower fill is used in cross-flow cooling tower, and sells very good in the world with good lifetime. Working principle: there are drift eliminators at two sides of this cooling tower fill, with certain 5 degree inclination which is requested in the hanging. This special design could decrease the splash of water droplets in the water flow falling, thus to reduce the water loss and wastage. If the wastage is less than 0.001%, it meets the standard. But if it is higher than 0.001%, please kindly check the cooling tower fill installation and make sure the right PVC fill size and quantity of the loose sheets. Product SpecificationNameCooling tower fill --- MLMaterialPVC, PP, CPVCLength1854mm, 2060mm, 2450mm, 2678mm, 2980mm, 3090mmWidth610mm, 750mm, 813mm, 915mm, 1220mm, 1520mmThickness0.30mm ~ 0.45mmPitch19mm ~ 20mmCustomizationAcceptedSampleProvidedProduct DetailsProduct FeatureHigh working efficiencyLight weightAnti-corrosionAnti-agingLow costEasy installationEco-friendlyProduction ProcessProduct DisplayPackage and TransportationOther modelsQ: Are you a factory or trading company? A: We are a factory as well as a trading company. Q: What is your delivery time? A: It depends on the order. Usually it takes about 20 days. Q: Can you provide a sample?A: Yes, we can provide a sample for your test. Q: What is your payment way? A: T/T, LC, Western Union, Paypal. If you are interested in any product, or if you have some questions, you can contact us, we will give feedback within 24 hours.