Lab Melt Spinning Machine

Product Description

Product Description
ApplicationAT225 Lab Melt Spinning Machine is a main key equipment in synthetic fiber production. This machine uses high temperature copper ring block to heat and melt the polymer sample, and extrudes the sample to be liquid trickle from a spinneret under the effect of inert gas (N2) pressure to produce the nascent fiber. Features★ It consists of melting system, spinning system and winding system;★ Stable inert gas pressure system (gas source should be prepared by the user himself);★ Metal protective hood with air leg; ★ Colorful touch screen, real-time display of temperature and air pressure in cylinder;★ Be able to independently set and control the temperature of each heating zone;★ Three heating zones with copper ring block to heat; ★ Insulation plate under the feed cylinder to block the spinneret hole for rapid heating;★ Max temperature up to 350℃;★ Cooling fan with adjustable speed;★ Dischargeable winding drum with adjustable rotation speed;★ Hand wheel to adjust the position of winding drum; ★ Organic glass window and illumination system, convenient to observe;★ With illumination system★ With emergency stop and heat on/off button; Technical specificationModelAT225Pressure rangeMax. 2MPa (can extend to 3.6Mpa)Input pressure: ≤13MPa, Output pressure: ≤1.5MPaaccuracy: ±0.01MPaTemperature rangeMax. 350℃Temperature accuracy±0.5℃Heating modeThree heating sections with copper ring block to heatMullite fiber insulationTemperature control modeThree independent temperature controlling with the accuracy of ±0.5℃Feed cylinder500ml, stainless steel, with soaking distribution deviceSpinneret plateDia. 0.15~0.5mmL: D: 2:1~3:1 1~20 spinneret holes (please specify before order)Winding systemWinding roller drive modeMotor-drivenSpeed range0~1400rpm, adjustableWinding roller diameter¢200mm, can be customizedMax. Winding dia.¢320mm (including ¢200mm winding roller)Power supplyAC220V, 50HzDimensions870mm×1310mm×1860mm (D×W×H)WeightsApprox. 320kgStandard ConfigurationNo.ItemQuantity1.Main machine1set2.Spinneret plate (on main machine)1pcs3.Winding roller (on main machine)1pc4.Distribution plate (on main machine)1pcs5.Filtering plate10pcs6.Gas inlet pipe1pcs7.Special spanner1pcs8.Temperature sensor1pcs for spare9.Packing list1pc10.Quality certificate1pc11.User manual1pcOptional ConfigurationNo.Item1Spinneret plate2Winding roller3Filtering plate4Temperature sensorOur CompanyPacking & DeliveryPakegingpakeging Details1. The equipment is covered with film is protect it from water vapour during the trip. 2. The box is filled with foam to protect the equipment from impact. 3. Exported wooden box made from plywood, don't need fumigated.Contacting Us