Conveyor Belt (Hot Vulcanizing Splice Uncured Cover Rubber Tie Gum)

Product Description

Steel cord conveyor belt hot vulcanizing intermediate rubber uncured tie gum
Uncured rubber is used for conveyor belt hot vulcanization.
Conveyor uncured intermediate rubber is an uncured rubber for hot vulcanized belt splicing. It is designed to use as an inter-core cord rubber replacement material in splicing steel cord conveyor belts or a tie gum in fabric belts.
Conveyor belt uncured cover rubber is designed for use as a cover rubber replacement material in splicing steel cord and fabric conveyor belts. The material is designed to bond to cured cover rubber in all standard grades of steel cord and fabric conveyor belts
-Enhances working life of steel cord belts splices
-Improves flexibility and strength of conveyor belt splices
-For NR, IR, SBR, BR, CR rubber belt splices
Tips:
1. The belt and steel wire belt are peeled off with layered peeling hook and vice, and then the joint part is polished (four kinds of joint methods).
2. The hot vulcanizing solution is coated on the steel cord conveyor belt and the uncured tie gum and the uncured cover gum joint part.
3.The uncured intermediate rubber is laid on the surface of the wire rope and the uncured cover gum is laid on the outer surface of the uncured tie gum and then pressed and vulcanized.
4. It is suggested that several knives should be cut on the uncured tie gum with wallpaper knife before vulcanization to avoid its bulging.

UNCURED TIE GUM FOR STEEL CORD CONVEYOR BELT
Order No	8111812	8111813	8111814	8111815
Dimensions(mm)	2X500	3X500	4X500	5X500

UNCURED CONVEYOR RUBBER FOR STEEL CORD CONVEYOR BELT
Order No	8111912	8111913	8111914	8111915	8111916
Dimensions(mm)	2X500	3X500	4X500	5X500	6X500