Product Description
Product Description
Product Description10inch sprinkler head for cooling towerProduct :cooling tower sprinkler headMaterial:ABS,aluminum alloy,copper alloySize:1.5'',2'',3'',4'',5'',6'',8'',10'',12''The number of sprinkler hole:4 ,6, 8, 10Application:cooling towerCooling tower sprinkler head is an important part of cooling tower water distribution system. Cooling water inlet pipe into the cooling tower sprinkler, and then by means of the spray cooling tower sprinkler hole formation water, and sprinkler on the cooling tower packing. Because the diameter of the nozzle is small, the water has a certain speed, according to the principle of action and reaction, cooling tower sprinkler is the opposite force in the direction of flow and rotation, make water flow distribution ceaselessly to the cooling tower packing. The water flow like a water film on the surface of the fill increase the water and the air contact area. Air and water reverse flow in the tower to exchange heat, make a portion of water evaporate, take away the heat, have the effect of lower water temperature.Aluminum alloy sprinkler headABS sprinkler headIf you have any question about 10inch sprinkler head for cooling tower, you can contact with anytime.Cathy is always herer. Contact details are as following: