Pure Polished Tungsten Bar Rod For Furnace

Product Description

Tungsten rod
1. Process: APT--powder--reduction suppression (sintering/car processing)products--rooted (spin forging/rolling)--cut-ground/polished
Applications:
Suitable for producing ion implantation parts
For producing electric light source parts and electric vacuum components
For producing heating elements and refractory parts in high temperature furnaces
Used as electrodes in the field of rare earth metal industry
Type and Size:

Type	Swaged Rods	Straightened Rods after Drawn	Ground rods available
Size	Ф2.4~95mm	Ф0.8~3.2mm

Chemical Composition:

Designation Tungsten Content Impurity Elements Content Total Each WAL1, WAL2 ≥99.95% ≤0.05% ≤0.01% W1 ≥99.95% ≤0.05% ≤0.01% W2 ≥99.92% ≤0.08% ≤0.01% Note: Potassium is not counted in impurities content.

We lay emphasis on the control over forging technologies in the machining process, which is supplemented by an HIP process as necessary, to ensure the characteristics of high density, fine crystal grains and easy deep processing of products.
According to different machining processes, tungsten bars have the conventional process density of 18.5 and the process density of more than 19.0 after HIP.

Molybdenum Products	Molybdenum rods/ Molybdenum plate /Molybdenum sheet
	Molybdenum wire/ Spray Moly wire/ Moly wire for EDM
	Molybdenum electrode/moly disk
	Molybdenum boat/ Molybdenum Crucible/Moly tube
Tungsten Products	Tungsten rods/ Tungsten plate/ Tungsten sheet
	Tungsten wire/ Tungsten electrode
	Tungsten crucible /Tungsten boat/ Tungsten tube
	Other specail shape
Alloy Products	TZM Products/MoLa products
	WNiFe / WniCu Product/ Alloy ball/WC-Co
	MoCu/Wcu rods or sheet

Our products
High quality with reasonable price
About FAQ
If you have any question,just feel free to say.We'll also provide you good after-sale service.
Company information
We have been exporting for more than 10 years,worthy of your trust.Hope there's a chance to establish friendly cooperation relations with you from all over the world.