Module spare parts 05704-A-0144

Product Details

Product Description

Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

05704-A-0144

During A/C PC mode, the ventilator delivers mechanical breaths at the set inspiratory pressure level (Pinsp) for a set inspiratory time (Tinsp) at intervals based on the set respiratory rate (Rate). The tidal volume delivered depends on the compliance of the patient’s lungs. In A/C PC mode, assist control is available to synchronize mechanical breaths to the patient’s spontaneous efforts and to allow triggering of additional mechanical breaths. With assist control disabled, the patient can initiate spontaneous breaths at the set PEEP level during the expiratory phase. To set Assist Control, select Current Mode > Mode Settings and select Assist Control. During A/C PC, the gas flow to the patient decreases after the pressure level reaches the pressure setting (Pinsp). A high initial flow pressurizes the circuit to the set inspiratory pressure (Pinsp). The flow then decreases to maintain the set pressure for the remaining inspiratory time. Tube Comp, Leak Comp, and Trigger Comp may be set if desired. The following settings are available in A/C PC mode: Category Setting Main Parameters FiO2 Pinsp PEEP Breath Timing Rate I:E or Tinsp Patient Synchrony Insp Trigger Bias Flow Rise Time Safety Pmax