PB/ SPB Particle Board Making Machinery Production Line

Product Description

Particle Board (PB) Making Machine Production Line
Particle board - also known as particleboard, low-density fibreboard (LDF), and chipboard - is an engineered wood product manufactured
from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or other suitable binder, which is pressed and extruded.
Oriented strand board, also known as flakeboard, waferboard, or chipboard, is similar but uses machined wood flakes offering more strength.
All of these are composite materials that belong to the spectrum of fiberboard products.
Characteristics
Particle board is cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when cost is more important than strength and appearance. Particleboard can be made more appealing by painting or the use of wood veneers on visible surfaces.
Though it is more dense than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fibreboard and hardboard, also called high-density fiberboard, are stronger and denser than particleboard. Different grades of particleboard have different densities, with higher density connoting greater strength and greater resistance to failure of screw fasteners.
A significant disadvantage of particleboard is its susceptibility to expansion and discoloration from moisture absorption, particularly when it is not covered with paint or another sealer. Therefore, it is rarely used outdoors or in places where there are high levels of moisture, except in bathrooms, kitchens and laundries, where it is commonly used as an underlayment shielded beneath a moisture resistant continuous sheet of vinyl flooring.
In dry environments, veneered particleboard is preferred over veneered plywood because of its stability, lower cost, and convenience.

Chipper Section

NO.	NAME	SPECIFICATION	QTY.	(KW)	REMARKS
1001	drum chipper	main machine dimensions: 2200*2150*1500mm	1	119
1002	belt conveyor	dimensions: 10000×600×500mm	1	2.2
1003	magnet	dimensions: 400×200×200mm	1
1004	chip silo	100 m3

Flake Section

NO.	NAME	SPECIFICATION	QTY.	(KW)
2001	belt conveyor	dimensions: 6000×600×500mm	1	2.2
2002	pulverizer	Model: 150#, electric motor: 30KW, sieve mesh number: 12, 18 Dimensions: 1300x1000x1100mm	4	120
2003	flake pipeline	Dimensions: Ф220x7000mm	2	5
2004	flake silo	70m3	1	5.5
2005	hopper	Dimensions: 4000×5000×1000mm	1
2006	screw feeding out pipe	Dimensions: 4000×1000×500mm	1	7.5
2007	belt conveyor	dimensions: 6000×600×500mm	1	2.2
2008	magnet	dimensions: 400×200×200mm	1

......

ITEM	INDEX
Raw Material	Pine, Poplar, Fir
Glue Type	MDI, PF, UF
Hot Press	Multi-opening Press, Continuous Press (4 ft, 8 ft, 12 ft)
Design capacity	50000, 150000, 250000 Cubic Meters

If you are interested, do not hesitate to contact me.
REGARDS!